Programmed specifically to operate with modern 24v fire/alarm panels, this discreet Auto Dial and SMS module with enhanced features fits neatly inside most Alarm panels. This module is supplied with an external antenna for mounting onto metal enclosures. This unit has the following features;
- Installs directly into the panel, remaing fully protected as it benefits from the inherant security and backup battery of the panel.
- Easy DIY installation with only 4 wires to connect. 24v, 0v, Trigger 1 and Trigger 2.
- Programmable to send up to 4 user defined SMS messages as required.
- Programmable to send up to 5 recipients.
- Programmable to dial up to 5 numbers.
- User programmable Site identifier
- Programmable Automatic Messaging - ensuring SMS alarm module is active. Programmable 1-9 week interval
- Power Loss Notification
- Ability to check via SMS if the Alarm has been activated
- For installation purposes, the module can notify you of GSM signal strength. All Numbers and Messages can be deleted , changed and recalled remotely via SMS commands.
- Unit comes complete with an External Bulkhead Mount Antenna with a 15cm flying lead
- Encased in protective Polyolefin tubing
- Suitable for mounting into an external enclosure
- Module is supplied with 1x PAYG GiffGaff MicroSIM card (Free £5.00 credit, once registered and topped up)
- This module will not work on the "Three" network or any providor using the Three network (id mobile etc)
- Designed and Manufactured in the UK.
- 12 month warrant
- Please note - Instructions indicate 12v, features and connectivity are the same for the 24v versions.
Download the Full operating and Installation Instructions here
English (US)
